Interior detailing1128380

از ویکی پاکوب

پرش به: ناوبری, جستجو

Car Wash Tips - How to Wash Your Car to obtain your Ride Good As New!

A thorough car wash at home can certainly yield professional results minus the expense of taking your automobile to be washed at a car wash or detailing service. The automobile wash tips included here won't help achieve professional results performing your vehicle wash at home but could also lead to a very satisfying very good. This article will help you figure out how to wash your car and get professional results in the home!

The items needed to perform car wash at home are:

 Bucket for water and Carwash Soap
 Car Wash Mitt or Sponge
 Towel or Absorber to dry the auto
 Shady Location
 and Most certainly not least.. A Dirty Car!

Optional items had to perform a car wash in your own home are:

 Second Bucket for water filled up with fresh, clean, water
 California Water Blade and other squeegee product
 Wheel Detailing Brushes
 Air Compressor with air nozzle

First, park the auto in a shady location from direct sunlight. Direct sunlight can impact the car wash as it will cause the soapy water to prematurely dry leave spots on the paint. interior detailing

If your wheels on the car are covered in dirt or brake dust, it is advisable to begin by scrubbing the wheels first. You should be aware however, that if you recently drove your vehicle it is advisable to not wash the wheels when the brakes are hot because heat will cause the soap or wheel cleaner to evaporate quickly and cause spotting or perhaps severe cases warp a brake rotor.

Rinse the tires and wheels with the hose. By using a sponge, rag, or wheel detailing brushes scrub away the grime and dirt that are covering the wheels. Avoid the use of the same sponge or rag that you're going to use to wash the rest of the car. If you were to use the same sponge, you might pick up contaminates in the wheels and those contaminates could easily scratch the paint on the human body of the car.

When the wheels initial scrub is finished, the main car wash can start. You start by rinsing the vehicle, beginning at the top of the vehicle and working your way down. Pay special attention to spots where dirt or debris may accumulate. A great tip here is to drag all of the windshield wipers away from the glass into the propped position prior to rinsing or soaping the vehicle. interior detailing

Fill one bucket with water as well as the Car Wash Soap making certain you follow the directions for the car wash soap container. For those who have a second bucket available fill by using fresh, clean, water. This second bucket will likely be used to clean the sponge or rag as to not contaminate the soapy water with dirt or grime.

Using the Car Wash Mitt or Sponge wash the vehicle from the top working your way down. When you are washing the car it is advisable to wash it in sections. First wash the roof, then wash the hood, a corner, one set of doors, and after that move to the other side. In between each section rinse the soap off. By doing cleaning the car in sections it ensures that the soap won't dry on the car and will enable you to see if any dirt was missed. While you move through the sections maintain the entire car wet. This may prevent spotting.

Some good tips for the soaping process are:

 Don't press way too hard. By pressing hard you could possibly inadvertently grind the dirt all over the paint and potentially scratch it.
 Don't ignore crevices. Necessities such as places where dirt collects and they are often missed by other carwash methods (i.e. gas station car wash machines)

After the entire car has been scrubbed and rinsed, it's time to dry the car. The main focus of drying the car is to dry the car before the air is able to dry it naturally. A naturally dried car can be a spotted car! interior detailing

A California Water Blade or similar squeegee product is great for this getting the water off the car very efficiently. You start out by taking the blade and running it over the paint removing a lot of the water from the cars surface. Then, utilizing a chamois, Absorber, Microfiber Towel, or traditional towel you dry the rest of the water from the car. When you have access to an air compressor as well as an air nozzle, you can use it to blow water out of tight crevices where a towel will not be able to arrive at. Be sure to open the hood, trunk, doors, to wipe out the jambs and other places where water has likely accumulated in the wash. car wash

Now move back and look at your beautiful, clean, car!